Equipment Pro has created a multi- purpose
401 Grinder to help change waste into a
material that can be used as fuel
•The Pipe liner design consists of a single shaft rotating a
headstock
•The headstock contains tungsten carbide-tipped cutting edges running against a hardened tool steel shear plate
•The shear plate contains holes that allow fluid to pass through. Anything that goes through the Pipe liner must go through these holes
•As string and other debris pass through the holes, they are
severed by the rotating cutting edge of the headstock. Large
pieces of wood or plastic are pushed toward the holes,
chipped and hammered into small enough pieces to
eventually pass through
•Double mechanical seal with TC/SC/SC/CA faces
•Simple, efficient design needs minimal maintenance
Headstock and Shear plate Benefits
The technologically advanced headstock and shear plate offer
the following benefits:
•Wear-compensating, spring loaded headstock assembly
maintains constant force against the shear plate and produces
consistent particle size regardless of cutter wear
•Shear plate acts as a screen, rejecting stones, cans, large
pieces of metal and wood that may damage pumps, filters, valves and other equipment
•Tungsten carbide cutters remain in contact with the shear plate for the life of the cutter, eliminating theneed for adjustment
•Quick, on-site cutter replacement without disconnecting piping
•Headstock, shear plate and body casting designs minimize jamming and eliminate the need for
expensive anti-jamming devices.
Grinder Data
*Powered by 15HP 1780 rpm 460V Explosion proof motor, 19 FLA, 1.15 SF.*Ductile Iron Construction.*Utilizes a Falk Ultramite gear box with an output ratio of 5.09:1. Producing a rotating speed of Approximately. 350rpm.*Rated for 500gpm using an 8MM sheer plate. (Other size sheer plates available are 6, 8-10 tapered, 10mm and custom sizes for applications are available.)*Double mechanical seal with barrier tank included with purchase of new grinders.*8” 150# rated flanged inlet and outlets
